Luxury Yacht & Speed Boat

Tagged ‘Yacht’

Heavy ground tackle makes for sound sleeping, but when it’s time to weigh anchor, it can be a pain unless you have a windlass to do the heavy lifting. Fortunately for our lower backs, there are windlasses sized to fit any boat and no reason not to have one aboard as an unpaid hand.

When properly installed, a windlass requires minimal maintenance.Here’s what you need to know.

First, rinse the windlass thoroughly after every voyage to wash off the salt, let it dry, and cover it. (Many anchor lockers are now equipped with the quick-connect-type freshwater connections for rinsing.) Read the rest of this entry »

1. Phonetic Alphabet

Clear communication is critical when sending emergen­cy VHF messages. To avoid any confusion, use the pho­netic alphabet to spell out important information, such as your boat name and the names of your crew. Below is the NATO/International phonetic alphabet.

A = alpha             B = bravo             C = Charlie           D = delta              E= echo

F = foxtrot           G = golf H = hotel              I = india                                J = Juliet

K = kilo                  L = lima                 M = mike             N = November  O = Oscar

P = papa Q = quebec         R = romeo           S = sierra              T = tango

U= uniform         V = victor             W = whiskey      X = x-ray              Y = yankee

Z = zulu Read the rest of this entry »

1. Hailing and Communication With Another Boat

Correct hailing procedure is to state the name of the boat you are hailing (usually on channel 16), then the name of your boat, followed by “over.”

“Over” tells the other party you have finished speaking. This is impor­tant because if both radio operators transmit at the same time, neither will be heard. Only one party can speak at a time. Any other words—”yoo hoo” or “Is anybody out there?” – constitute incorrect procedure.

Once you’ve established contact, switch to a working channel. Once you’ve switched to a working channel, say the name of the boat you are hailing followed by the name of your boat. At the end of your conversation, say your boat name and “out” or “out, (your boat’s name), returning to 16.” Read the rest of this entry »

Perhaps you’ve noticed, as I have, that one of the features particularly intrig­uing to many electronics shoppers these days are those slick virtual engine-gauge screens you can pull up on many a multifunction display (MFD). Never mind for a moment that most of those MFDs can’t yet connect to many engine models; instead, imagine how those screens would look if you ran a company that makes umpteen real ma­rine engine gauges every year.

Many of its current gauges—there are some 10,000 models if you count all the available colors and the various brand names they’re sold un­der—feature a little data LCD in addi­tion to a traditional pin and dial. Moreover, the company’s MG2000 sys­tem includes a powerful microprocessor that’s built into a gauge: like casing and able to talk with all sorts of engine con­trol modules (ECMs), then mix the data with other inputs to do calculations like fuel flow, and finally rebroadcast every­thing to a network of less-intelligent gauges. Read the rest of this entry »

A portable oil-changer is basically a five- gallon plastic bucket with a pump mounted on top; the pump sucks up old lube oil through a cocktail-straw-size tube via the dipstick hole and dumps it into the pail.

I used one of these for a couple of years on my GM-powered Hatteras, and it worked fine, albeit slowly—very slowly. If you’re talking twin engines plus gears, plus a genset, pack a lunch when you change your oil, because you’re going to be there a while.

A better solution is to invest in a built-in oil-change system, comprising a reversible electric pump and a manifold of valves plumbed to your engine crankcases, trans­missions, and genset. You pump the used oil into a container, and then move the exhaust hose into a five-gallon pail of fresh oil (where it now becomes the supply hose), re­verse the pump, and refill. The oil is quickly pumped out and in via the oil pan drain, rather than through the dipstick tube. You’ll also have to find a place to dispose of the old oil properly—ask your marina manager or even your dockmates for their advice.

Reverse, X-Change-R, and Jabsco sell oil- change systems to suit multi-engine setups. Installation is straightforward, but drains each engine before pulling the oil-pan plug, or you’ll have an EPA-size cleanup job. I’d bite the bullet and pay the yard—its mechanics are skinnier.