Luxury Yacht & Speed Boat

Tagged ‘Top Quality’

Australia-based Riviera Yachts is known state­side for its line of convertibles, but the builder made a big splash at last year’s Fort Lauderdale Internation­al Boat Show with a two-stateroom, 36 foot express. Now, to appeal to those with bigger families—or more friends— Riviera has upped the ante with the three-stateroom 4700 SportYacht.

The 47-footer takes her kin’s concept of one-level living and expands it. The resulting flexibility of the saloon-helm area is outstanding: Aft, a glass and stainless steel door folds away, and the bulkhead’s expanse of glass flips up and latches firmly into place to the hardtop. Read the rest of this entry »

Similar to ACR’s ResQFix PLB, McMurdo has introduced a GEPIRB (GPS-equipped Emergency Position Indicating Radio Beacon) that’s smaller yet supposedly performs better.

The 1.5-pound SmartFind Plus ac­complishes this largely by using LEDs for its strobe, which along with automatic seawater activation, built-in flotation, and longer trans­mission life are what distinguish EPIRBs from PLBs (plus the fact that some models come with an automatic float-free mount).

Note that Simrad has also introduced a compact GEPIRB in the same price range and that both companies also offer GPS-less models, but those will typically take longer to de­liver less-accurate position information to the SAR authorities.

A portable oil-changer is basically a five- gallon plastic bucket with a pump mounted on top; the pump sucks up old lube oil through a cocktail-straw-size tube via the dipstick hole and dumps it into the pail.

I used one of these for a couple of years on my GM-powered Hatteras, and it worked fine, albeit slowly—very slowly. If you’re talking twin engines plus gears, plus a genset, pack a lunch when you change your oil, because you’re going to be there a while.

A better solution is to invest in a built-in oil-change system, comprising a reversible electric pump and a manifold of valves plumbed to your engine crankcases, trans­missions, and genset. You pump the used oil into a container, and then move the exhaust hose into a five-gallon pail of fresh oil (where it now becomes the supply hose), re­verse the pump, and refill. The oil is quickly pumped out and in via the oil pan drain, rather than through the dipstick tube. You’ll also have to find a place to dispose of the old oil properly—ask your marina manager or even your dockmates for their advice.

Reverse, X-Change-R, and Jabsco sell oil- change systems to suit multi-engine setups. Installation is straightforward, but drains each engine before pulling the oil-pan plug, or you’ll have an EPA-size cleanup job. I’d bite the bullet and pay the yard—its mechanics are skinnier.

Sometimes less is more, especially if doing less means doing it better. A case in point is the layout of Cheoy Lee’s 78 Sport Motoryacht. Rather than maximizing the number of guest staterooms, the sav­vy builder opted for just three. But each one is so generously proportioned that it’s like every stateroom is a master suite. All three extend full-beam, the master offering a king berths while the two guest suites offer queens. For extra privacy, the forward stateroom is accessed via its own stairway alongside the lower helm. Even the crew stateroom is exceptional; full-beam at the stern with upper and lower berths, a dinette, and a private head with separate shower. Read the rest of this entry »

Mika Orlando went from owning a CABO 31 to a CABO 40 to a CABO 52 Express in just three years. “CABOs have amazing fish- catching ability,” says Mika. “On our second time out during a tournament, we were still just dialing in our new CABO 52 Express and we caught and released a 300-lb. blue marlin!”

Top quality power.
Quality on the CABO 52 begins in the engine room. MAN V12-1550CRM, 1528 HPm, V¬12 common rail injection, turbocharged and after-cooled marine diesel engines nestle into the glistening white gelcoat finished engine spaces, with plumbing, wiring, shafting and control cables neatly run, secured and easily accessed. Power options range from 1500 HPm MTU V-10’s to 1675 HPm Caterpillar C32’s. Read the rest of this entry »