Luxury Yacht & Speed Boat

Tagged ‘Technical’

ACR’s ResQFix Personal Locator Beacon is 35 percent smaller and 25 percent lighter than its previous AquaFix model and yet purportedly performs better.

This is not so trivial when you consider that this six-inch-high unit is meant to acquire a fast GPS fix in tough conditions (like from its float bag next to you in a rough sea), transmit that position and your ID via 406 MHz to the search-and-res­cue satellite system, and also send out a 121.5-MHz signal that rescuers can home in on (note that your own yacht could use that homing signal too).

My confidence in this complicated technology was bolstered when I visited ACR’s factory last year and saw both its elaborate GPS simulation facility, used to fine-tune the Pill’s receiver, and its extensive testing routines. The $750 ResQFix, which uses a five-year lithium battery and is waterproof to 33 feet, also has its two circuitry, battery pow­er/voltage, and GPS acquisition testing built in. Note that PLBs like this are also carried by small aircraft pilots and others who venture into wilderness, watery or otherwise.

Heavy ground tackle makes for sound sleeping, but when it’s time to weigh anchor, it can be a pain unless you have a windlass to do the heavy lifting. Fortunately for our lower backs, there are windlasses sized to fit any boat and no reason not to have one aboard as an unpaid hand.

When properly installed, a windlass requires minimal maintenance.Here’s what you need to know.

First, rinse the windlass thoroughly after every voyage to wash off the salt, let it dry, and cover it. (Many anchor lockers are now equipped with the quick-connect-type freshwater connections for rinsing.) Read the rest of this entry »

The big consumer electronics company Cobra has gotten serious a­bout marine VHF, introducing both this feature-packed handheld and a Class D DSC fixed radio. For instance, the $170 HH425 and the $190 F80 are each sub­mersible and backed by three-year warranties.

Both also offer a “rewind, play again” feature that space shots like me will find handy—a built-in memory chip records the last 20 seconds of whatever breaks squelch on the channel (s) you’re monitoring, giving you a second chance to catch a call.

The 425 also includes a full 5-watt GMRS (a.k.a. “family radio”) transceiver, along with goodies like privacy codes, individual caller rings, and VOX (hands-free) operation. That means that with a couple of inexpensive GIVIRS handsets, perhaps from market leader Cobra, you’ll have a sophisticated communications network for use around a ma­rina and beyond (unlike VHF, GMRS is land legal).

You can even set up the 425 to scan both selected VHF and GMRS channels simultaneously, though a little man­ual investigation is required. In fact, most of the 425’s features do entail some oper­ational complexity, plus I found its ergonomics clunkier than more conventional handhelds, like the Icom M34.

1. Hailing and Communication With Another Boat

Correct hailing procedure is to state the name of the boat you are hailing (usually on channel 16), then the name of your boat, followed by “over.”

“Over” tells the other party you have finished speaking. This is impor­tant because if both radio operators transmit at the same time, neither will be heard. Only one party can speak at a time. Any other words—”yoo hoo” or “Is anybody out there?” – constitute incorrect procedure.

Once you’ve established contact, switch to a working channel. Once you’ve switched to a working channel, say the name of the boat you are hailing followed by the name of your boat. At the end of your conversation, say your boat name and “out” or “out, (your boat’s name), returning to 16.” Read the rest of this entry »

Perhaps you’ve noticed, as I have, that one of the features particularly intrig­uing to many electronics shoppers these days are those slick virtual engine-gauge screens you can pull up on many a multifunction display (MFD). Never mind for a moment that most of those MFDs can’t yet connect to many engine models; instead, imagine how those screens would look if you ran a company that makes umpteen real ma­rine engine gauges every year.

Many of its current gauges—there are some 10,000 models if you count all the available colors and the various brand names they’re sold un­der—feature a little data LCD in addi­tion to a traditional pin and dial. Moreover, the company’s MG2000 sys­tem includes a powerful microprocessor that’s built into a gauge: like casing and able to talk with all sorts of engine con­trol modules (ECMs), then mix the data with other inputs to do calculations like fuel flow, and finally rebroadcast every­thing to a network of less-intelligent gauges. Read the rest of this entry »